make an enquiry

Manufacturers & Exporters of Gate Valves

Gate Valves are used where a minimum of pressure drop through (The valve is important. They are employed where valves are normally to be Wide open or completely closed. They are designed to permit either a straight, full & free flow of the fluid or no flow at all.

Technical Specification

TYPEGate Valves of bolted bonnet solid/flexible/wedge. Outside screw and yoke and rising spindle.
SIZE25 mm through 500 mm.
CLASS150 , 300, 600.
END CONNECTIONSFlanged to BS, DIN ANSI, butt weld ends to ANSI B 16.25.
MATERIAL OF CONSTRUCTIONCast carbon steel toASTM A 216 Gr. WCB Cast st. Steel to ASTM A 351 Gr. CF 8, CF8M, CF 3, CF 3M, Alloy-20 to A351 Gr. CN 7 m. hastelloy B & C, Monel and other alloy steel.
FASTNERSBolts/nut. ASTM A 193 Gr. B7 / A 194 Gr. 2H.
DESIGN StdAPI 600/BS 1414
LEAKAGE CLASSCLASS IV
OTHER FEATURESStellited wedge and body seat ring also provided if required.
ACCURA VALVE : home | about us | products | achievements | contact | enquiry

© Copyright 2016 Accura Valve All rights reserved.

Designed by GID | Promoted by MID